(note for QC residents)
Value with Versatility
Starting at: $14,399
iTC’s throttle-by-wire set up improves throttle response, smoothes power delivery and ensure precision throttle control even in the roughest of terrain. The Rotax engine uses a throttle-by-wire system for more accurate throttle response and a smooth power delivery. If the driver’s foot bounces on the gas pedal in rough terrain, iTC detects unwanted bounces and filters the input, resulting in more throttle accuracy, especially at low speed. It also reduces the number of moving parts in the vehicle; has no cable to adjust, lubricate, or replace; and the system has an increased life span.
Outboard disc brakes with 214-mm discs and twin-piston calipers. Large 214-mm outboard hydraulic disc brakes feature twin-piston callipers to provide superb stopping power.
The Can-Am Commander's double A-arm front suspension is designed with dive-control geometry that works to eliminate diving under heavy breaking and rough terrain. The front end features 10 in. of travel (25 cm) and five-way preload-adjustable motion-control shocks.
This suspension features five-way, pre-load-adjustable motion control shocks with 10 in. (254 mm) of travel and large diameter shock bodies (1.4 in./36 mm) for better durability and better resistance to fading.
The Can-Am Commander models feature 1,928 cube inch of convenient and versatile cockpit storage space so you can take your essentials with you.
Tow heavy loads of up to 1,500 lb with the Commander . Working with a Commander side-by-side vehicle is a snap with its ability to tow up to 1,500 lb.
The industry’s first standard anti-theft device. The Can-Am Commander comes with two different keys. One that limits top speed to 44 mph (70 km/h). The second is the performance key with no limitation on speed or power. An optional third work key is available for purchase and limits top speed to 25 mph (40 km/h) for use on work sites.
ROPS-approved, 2-in. steel cage that is fully approved using the Rollover Protective Structures (ROPS) industry standard.
Located on both sides of the vehicle, side nets can be operated by one hand and won’t impair the occupants’ vision. Get in and out quickly with this simple one-hand and one-click system. Designed to maintain a clear field of vision for driver and passenger.
The passenger handhold and grab bar provide a comfortable location for passenger’s to place their hands while riding off-road. Ergonomically designed passenger handholds are located immediately in front of the passenger and to their left-hand side.
The Can-Am Commander was designed with a more ergonomic seating and steering position than competitive side-by-sides. This provides an optimal seating position, automotive-like ergonomics, low hip position (H point), easier ingress / egress, optimal comfort when riding and more legroom.
The industry’s most versatile and usable cargo box design has a 600-lb cargo capacity, dual storage levels, anti-rust box and tilt-assist dumping. Industry's first cargo box with two levels separated by a removable, water-resistant panel. It offers the possibility to have an upper and a lower bed with their independent tailgate. Carrying capacity of the box is 13.1 cu ft /372 l of total volume and 600 lb. The tilt-assist dump-bed can be easily activated from both sides. Its single latch upper and lower gates are easily removable and no tools are required. Made of high-strength, anti-rust, anti-dent composite. Also comes with an optional trunk lock as an accessory to secure lower level.
The Can-Am Commander family of side-by-side vehicles features the industry’s best lighting system at 240-W. Automotive-style projectors, on each side, run at 120-W in low beam and 240-W in high-beam mode.
The DPS™ technology includes a Direct Link setup that uses advanced magnetic field sensors for faster response to steering input than competitive technology, which then minimizes steering lag. Less kickback and more trail feedback is supplied to the operator because of the 50:1 final gear ratio, which is the largest in the industry. A high-capacity 50-amp motor means the DPS™ will never fade with heavy use and all DPS™-equipped models also come with the Visco-Lok† QE.
Wheels featuring a strong lightweight construction.
All DPS-equipped models have the Visco-Lok† QE calibration up front, which has all the features and benefits of the standard quick-engagement Visco-Lok† differential, but with an even quicker engagement point. The industry’s only progressive auto-locking front differential that engages all wheels at any speed. It constantly monitors front wheel speed, and if it detects one wheel spinning faster than its mate, it progressively sends more power to the wheel with better traction. All without the driver having to push buttons or pull levers.
The lightweight radial tires offer a smoother ride, predictable cornering and optimum climbing confidence.
Share on
Your Can-Am side-by-side vehicle is closer thanyou think.
Read and comment the latest community information.